junger D*AP4 VAP Edition Manual page 16

Operating display – Audio Processor > Voice
Audio Processor
Voice
M/S
Input
Matrix
This menu gives access to tweak the voice channel(s). The active <Shift>
is another page (2/2):
Audio Processor
Voice
Ouput
The example below explains how to set parameters via the X*AP. E.g. if you press <Input>
all parameters for the Input function block will be accessible (here we assume Stereo mode):
Voice: Input Link
V2 1/2 Linked
Here you are at the input
again toggles between two pages and gains access to the remaining parameters.
Here is the example for page 2/2 after pressing the <Shift> button:
Voice: Input Delay Coarse [ms]
1/2
1/2
If the voice channels operate in stereo mode: SYSTEM > Setup > Voice Channel Mode = Stereo,
you are able to link / unlink the respective processing blocks (see AUDIO PROCESSOR > Input):
Voice: Input Link
V2 Unlinked
1/2 Linked
The above example shows both voice channels in Linked mode.
Voiceproc 3
Phase
De-Esser
Rotator
Voiceproc 3
On Mute
On off
section of the voice channel. The <Shift>
Fine [samples]
0 0
On Mute
On off
10.110.88.135
Spectral
Equalizer Dynamics
Signature
10.110.88.135
Gain[dB] Polarity
0.0 Normal
HPF [Hz] LPF [kHz]
OFF OFF
Gain[dB] Polarity
0.0 Normal
12
D*AP4 VAP
1/2
MENU
Leveler
button indicates that there
2/2
MENU
1/2
MENU
button
2/2
MENU
1/2
MENU
ESC
ESC
ESC
ESC
ESC