Table of Contents
Advertisement
D*AP4 VAP
Setup GUI – AUDIO PROCESSOR – De-Esser
Important Note! For the following explanations we assume that the D*AP4 VAP is set up for
2 x Mono operation mode (see SYSTEM > Setup > Voice Channel Mode). I.e. there are always two voice
channels displayed and no link option.
Each microphone channel has an independent
Phase Rotator.
Here the display for stereo operation but unlinked
Link
Phase Rotator
Mode
Link
De-Esser
Frequency (Hz)
Range (dB)
Filter Type
Q
47
[Unlinked / Linked]
For stereo operation you may
link the setup parameters of
both voice channels.
[ON / OFF]
[OFF / ON / AUTO]
OFF
System is inactive
ON
System always applies phase
wrapping
AUTO
Unbalanced waveforms are
automatically detected and
phase wrapping is applied only
if necessary.
[Unlinked, Linked]
For stereo operation you may link the
setup parameters for both voice
channels.
[ON / OFF]
[1000 ... 3000 ... 16000]
[-20.0 ... 0.0]
[Peak / High Shelf]
[0.4 ... 1.0 ... 8.0]
Advertisement
Table of Contents
