Table of Contents
Advertisement
D*AP4 VAP
Setup GUI – AUDIO PROCESSOR – On Air / Mobile UI
The V'*AP provides an operator UI for live application that may be used on tablets or mobile phones
but may also be displayed on a PC's web browser. When you click on the <Mobile> soft button in the
upper right area of the GUI above the <Help> button, a new tab in your current browser will open up.
But you can also use the URL: "<IP-address>/mobile" to open the operator UI elsewhere
(in a browser of a different PC or a mobile phone or a tablet). For mobile devices it requires wireless
accessibility of the D*AP4 VAP via a WLAN.
If the device is setup for two independent voice channels
(see SYSTEM > Setup Voice Channel Mode = 2 x Mono)
you must select one of the two voice channels firstly.
In case of Voice Channel Mode = Stereo both channels will be
controlled via Voice 1 channel.
Keep in mind that you may assign meaningful names to the
voice channels (see SYSTEM > Setup > Section / Channel Labels).
For this explanation we named them "Left" and "Right".
The appearance of the mobile UI may be configured at SYSTEM > Remote Access > Mobile UI.
64
Advertisement
Table of Contents
