Table of Contents
Advertisement
Optical Output, LC
BNC Output
General Features
Technical Data – Option Board Audio-over-IP DANTE™ I/O [O_DAP_DANTE_a]
Standards
Audio
Audio Sample Rate
Inputs and Outputs
Inputs
Outputs
General Features
Cable length (max.)
64/56 channels @ 44.1 and 48kHz, 32/28 @ 88.2 and 96kHz
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
Connector type
Center wavelength
Output optical power
Optical and BNC output carry the same signal.
Impedance
Output voltage
Field-replaceable optical module (SFP)
•
Reference grade word clock recovery, master-sync capable
•
Dedicated routing for non-processed channels, all channels
•
(max. 64) can be routed to/from the device or looped through
AES3 channel status management, non-audio detection
•
Parallel outputs (BNC/LC) for media conversion
•
Audio-over-IP by Dante™ Digital Audio Networking Standard
24bits, transparent forwarding of PCM and compressed audio
44.1, 48, 88.2, 96kHz
2 x Gigabit Ethernet RJ45 connectors (100M/1Gbit),
primary and secondary port
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
Processable by D*AP8: 16 channels @ 44.1, 48kHz
Processable by D*AP4: 8 channels @ 44.1, 48, 88.2, 96kHz
AES67 compliant (when available)
•
Network master-sync can be provided by D*AP device
•
Master-sync capable (for D*AP device)
•
Non-audio detection for input channels
•
Glitch-free Dante™ audio redundancy using dual Ethernet
•
networks
[O_DAP_MO_MM_a]: 1.5km, OM2 multimode
[O_DAP_MO_SM_a]: 2km, singlemode
(standard values, others on request)
LC (IEC 61754-20)
1310nm (typ.), 1270 ... 1360nm
[O_DAP_MO_MM_a]:
-23 ... -14dBm, OM2 multimode (50/125µm)
[O_DAP_MO_SM_a]:
-15 ... -8dBm, singlemode (9/125µm)
(standard values, others on request)
75Ohm
0.6Vpp (typ.) @ 75Ohm
82
D*AP4 VAP
Advertisement
Table of Contents
