Table of Contents
Advertisement
D*AP4 VAP
When you press hotkey #2 you are able to unlink both channels. Now you must simply push the rotary
encoder (or turn it counter clockwise / clockwise) to toggle between Linked and Unlinked condition.
In case of Unlinked, the display shows two independent parameter sets.
By pressing hotkey # 1
Voice: Input
Link
1
Unlinked
2
V2
Unlinked
Unlinked
The examples above demonstrates the general way how to setup parameters of the
AUDIO PROCESSOR of the D*AP4 VAP:
* Select a parameter
* Change it by using of the Rotary Encoder.
- Push it to toggle states
- Turn it to increment / decrement values.
Important Note! Not all processing blocks can be linked / unlinked. Carefully compare the settings via the
web GUI if you are not certain about individual settings. In general the X*AP RM
the GUI settings. To access all parameters of a function block you must sometimes use the <Shift> button.
E.g. the equalizer has 5 pages for one voice channel!
Operating – menu structure of the X*AP RM
Power up display
<MENU> opens X*AP RM
<Address> setup
<Netmask> setup
<Gateway> setup
<empty>
Device 1
Device 2
Device 3
Device 4
<ESC> back to power up display
<connect> will connect with that particular D*AP4 VAP and opens the main operating display:
Hotkey #
1 <Clear>
2 <Just De-Ess>
3 <Gentle>
4 <Radio>
5 <Normalize>
6 <Heavy>
7 <empty>
8 <Panic>
<ESC>
will jump back to power up display
<MENU> opens the upper operating displays:
Hotkey #
1 <Analog Mic Interface>
2 <ON AIR Profiles>
3 <not active>
4 <Loudness Meters>
5 <Voice>
6 <Program>
7 <Monitor 1/2>
8 <Monitor 3/4>
<ESC> back to main operating display
you can toggle the voice channel that is under control:
On
Mute
On
off
On
off
remote panel – menu tree
1
remote panel IP setup menu. See X*AP RM
1
setup IP & ON / OFF
setup IP & ON / OFF
setup IP & ON / OFF
setup IP & ON / OFF
Gain[dB]
Polarity
0.0
Normal
0.0
Normal
13
1/2
MENU
ESC
menus are a duplication of
1
manual for details.
1
Advertisement
Table of Contents
