Table of Contents
Advertisement
D*AP4 VAP
Setup GUI – EVENTS – Events – Measurement Events
Measurement events can be used to control the integrated loudness measurement of the
program path of the D*AP4 VAP:
For each measurement event you can assign one of the possible control functions from the pull-down.
Setup GUI – EVENTS – Events – I/O Events
At the moment I/O events are restricted to control the GPOs of the D*AP4 VAP:
Each GPO (when incorporated into that I/O event) can be set to the behavior as follows:
Clear
Set
Follow
Toggle
Turns a GPO off that was previously turned on.
Turns a GPO on.
The GPO follows the state of the trigger.
The trigger will toggle that GPO
Be careful because it needs a definite known starting condition to work
properly.
73
Advertisement
Table of Contents
