Table of Contents
Advertisement
D*AP4 VAP
The content of this operating UI duplicates useful controls of the V*AP. You may activate Hotkeys
which are assigned to the X*AP RM
of the event manager (see EVENTS > Triggers > Remote Hotkeys)
for details).
But you may directly trigger Actions or Preset Events at the bottom of the screen as well.
The mobile UI will only display preset events which contain processing relevant parameters called
"Profiles". I.e. you can not reconfigure the VAP from here.
On a touch screen (or via left mouse button) you may simply press
the icons (if enabled via SYSTEM > Remote Access > Mobile UI)
in the middle of the screen to temporarily mute that channel
for a cough cut function or to turn voice over on / off.
The text at the top of the button(s) can be defined via the web GUI.
The system distinguishes between two possible texts.
The option menu at the upper left hand
side offers some additional settings
from the mobile GUI:
remote panel which in turn maybe setup for trigger actions
1
On Air Indication [OFF AIR / ON AIR]
On Air Text
(Mobile UI)
Off Air Text
(Mobile UI)
Reset Text
Cough Cut
You can set the browser to full screen or call the
setup GUI via <Desktop Version>.
Finally you may change the voice channel that is under
control from the mobile UI.
65
turns that mic channel permanently
on or off
will be displayed if the mic is on air
will be displayed if the mic is off air
will restore the default text for both
the on air and the off air display
temporary mic mute button.
It works in parallel to the mobile UI's
<Mic Active> button.
Advertisement
Table of Contents
