Table of Contents
Advertisement
Important Note! For numeric input double click into the parameter field. You must use the period as a
decimal separator. For graphical input use the left mouse button and drag it horizontally to change frequency
and vertical to change gain while the mouse wheel will change the Q value.
The EQs offer two different peak modes:
Peak 1: The bell curves of the Peak 1 filter features constant quality (Q) over gain.
Q is defined at -3dB below peak. It does not change when altering gain.
Peak2:
The bell curves of the Peak 2 filter also features constant quality (Q) over gain.
But Q is defined at 50 % of gain. Subjectively the bell curve becomes sharper when
increasing gain, but this is only true for the lower 6-8dB of gain.
Graph
The color code of the column
Permanently
headers will change depending
on the selected voice channel.
Visible
White color represents the actual
selected channel (Voice 2 for
example) while the other channel
shows light green.
Equalizer
Band 1
Filter Type
Frequency (Hz)
Gain (dB)
Q
Band 2 ... 5
52
D*AP4 VAP
[ON / OFF]
will be selected by the pop up
Above.
[20 ... 20000]
[-20.0 ... 20.0]
[0.4 ... 10.0]
same parameter set as
Band 1.
Advertisement
Table of Contents
