Registration; Idle Screen; Entering Data And Editing Fields - Yealink SIP-T19 E2 User Manual

Enter the desired value in the IP Address, IPv6 IP Prefix, Default Gateway, Pri.DNS and
4.
Sec.DNS field respectively.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Note The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.

Registration

Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T19(P) E2 IP phone supports only
one account. If your phone is not registered, you may have to register it. For more information
on how to register your phone, refer to

Idle Screen

If the phone has successfully started up, the idle LCD screen will be displayed as below.
The idle screen displays the label of default account, time and date, and four soft keys.
Note You can configure the phone not to display the label of default account, contact your system
administrator for more information.

Entering Data and Editing Fields

You can enter data and edit fields using the phone keypad.
Keypad on the phone provides different characters (or numbers) when using the 2aB, abc, Abc,
Account Registration on page 56.
Getting Started
17