Answering Calls - Yealink SIP-T19 E2 User Manual

To place a call using the headset:
With the optional headset connected, press
1.
Enter the desired number using the keypad.
2.
Press
3.
To permanently use the headset mode, refer to
Note
The SIP-T19(P) E2 IP phone can handle multiple calls at a time. However, only one active call (the
call that has audio associated with it) can be in progress at any time, other calls are placed on
hold. The SIP-T19(P) E2 IP phone can handle a maximum of 2 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T19(P) E2 IP phone. To place a new call during an
active call:
Press the Hold soft key to place the original call on hold.
1.
Press the NewCall soft key.
2.
Enter the desired number using the keypad.
3.
Press
4.
You can press
retrieve the desired call.
If you want to place more than 2 calls at one time, the IP phone LCD screen will prompt
Note
"Sorry, you can only make two calls!"

Answering Calls

When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

Using the headset

You can reject incoming calls by pressing the Reject soft key. You can also activate Do Not
Note
Disturb mode to ignore all incoming calls without ring on your phone. For more information,
refer to Do Not Disturb (DND)
You can forward incoming calls to someone else by pressing the FWD soft key. For more
information, refer to
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
, , or the Send soft key.
, , or the Send soft key.
or to switch between the calls, and then press the Resume soft key to
.
on page 76.
Call Forward on page 77.
to activate the headset mode.
Headset Prior on page 50.
Basic Call Features
67