Yealink SIP-T19 E2 User Manual page 90

User Guide for the SIP-T19(P) E2 IP Phone
Call forward is configurable via web user interface at the path Features->Forward&DND.
You can also enter the SIP URI or IP address in the Forward to field. For more information on
Note
using the SIP URI or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
administrator.
To configure the forward authorized numbers via web user interface:
Click on Features->Forward&DND.
1.
Select Enabled from the pull-down list of Forward Emergency.
2.
Enter the numbers in the Forward Authorized Numbers field.
3.
For multiple numbers, enter a comma between every two numbers.
Click Confirm to accept the change.
4.
When call forward is enabled on the phone, the phone cannot forward incoming calls from
the numbers specified in the Forward Authorized Numbers field.
Note
Forward authorized number is configurable via web user interface only.
To disable call forward via phone user interface:
Do one of the following:
Press
-
Press Menu->Features->Call Forward.
-
Press
Press
80
Placing Calls
when the phone is idle.
or to select the desired forwarding type and then press the Enter soft key.
or , or the Switch soft key to select Disabled to disable the call forward.
on page 65.