Headset Prior - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
headset automatically.
Enter the desired number and then press the Send soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls
To deactivate the headset mode:
Press
1.
The headset icon

Headset Prior

You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
Click on Features->General Information.
1.
Select Enabled from the pull-down list of Headset Prior.
2.
Click Confirm to accept the change.
3.
To use headset prior feature, you should activate the headset mode in advance:
Physically connect the headset.
1.
Press
2.
If headset prior is enabled, the headset mode will not be deactivated until you press the Headset
Note
key again.
If headset prior is disabled, the headset mode can be deactivated by pressing the Speakerphone
key or the Headset key.
Headset prior is configurable via web user interface only.
50
on page 65.
again on the phone.
disappears from the idle screen.
to activate the headset mode.