Yealink SIP-T19 E2 User Manual page 93

Directory on page
Press ,
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory on page
Press ,
You can also perform a blind transfer to another existing call when there are multiple calls.
Before performing a blind transfer to another existing call, make sure that the Allow Trans Exist
Call is enabled. For more information, refer to
.
on page 81
To perform a blind transfer during multiple calls:
Press or the Tran soft key during a call.
1.
You can do one of the following:
2.
Press or
-
Select NewCall, and then enter the number you want to transfer the call to.
-
Enter the number you want to transfer the call to.

Press
If you are using a handset, the transfer can be completed by hanging up the
handset.
Press the Dir soft key, and then select Local Directory. Select the desired group

and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
Press the Dir soft key, and then select History. Select the desired list and then

press
advance. Refer to
Press
Press the Dir soft key, and then select Remote Phone Book. Select the desired

group and search for the contact (Directory should be configured in advance.
Refer to
31 for more information).
or the Send soft key to complete the transfer.
31 and Remote Phone Book
or the Send soft key to complete the transfer.
Allow Trans Exist Call
to select the desired hold call you want to transfer the call to.
or the Tran soft key to complete the transfer.
on page 31 for more information).
, or the Send soft key to complete the transfer.
or to select the entry (Directory should be configured in
Directory on page
, or the Send soft key to complete the transfer.
Directory on page 31 and
on page 43 for more information).
31 for more information).
Remote Phone Book on page
Basic Call Features
43 for more
83