Disconnecting The Wireless Network Connection; Deactivating The Wi-Fi Mode; Registration - Yealink SIP-T42S User Manual

User Guide for the SIP-T42S IP Phone
network that the IP phone automatically connects to.
To delete the saved wireless network profile(s):
-
Select Delete or Delete All.
1)
If you delete your wireless network profile from your phone, you need to
manually connect to it next time.

Disconnecting the Wireless Network Connection

To disconnect wireless network via phone user interface:
Press Menu->Settings->Basic Settings->Wi-Fi->X Available Network(s) (X represents
1.
the number of available networks)
Select the connected wireless network, and then press the Disconnect soft key.
2.
The wireless network is disconnected. You can press the Connect soft key to connect
again.

Deactivating the Wi-Fi Mode

To deactivate the Wi-Fi mode via phone user interface:
Press Menu->Settings->Basic Settings->Wi-Fi.
1.
Press
2.
Press the Save soft key to accept the change.
3.
Wi-Fi is configurable via web user interface at the path Network->Wi-Fi.

Registration

Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T42S IP phone supports up to 12
accounts. If your phone is not registered, you may have to register it. For more information on
how to register your phone, refer to
28
or , or the Switch soft key to select Off from the Wi-Fi field.
Account Management on page 80.