Semi-Attended Transfer; Attended Transfer - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
Press
3.
Then the call is connected to the number to which you are transferring.

Semi-attended Transfer

To perform a semi-attended transfer:
Press
1.
Do one of the following:
2.
- Enter the number you want to transfer the call to.
Press
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to
on page
Press
- Press the Dir soft key, and then select History. Select the desired list and then press
or
Directory
Press
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
If there are multiple calls, you can select the NewCall and repeat steps mentioned
-
above to complete transfer.
Press
3.
If you are using a handset, the transfer can be completed by hanging up the handset.

Attended Transfer

To perform an attended transfer:
Press
1.
Do one of the following:
2.
- Enter the number you want to transfer the call to.
Press
84
information).
Press , or the Send soft key to complete the transfer.
or the Tran soft key to complete call transfer.
or the Tran soft key during a call.
or to dial out.
31 for more information).
, or the Send soft key to dial out.
to select the entry (Directory should be configured in advance. Refer to
on page 31 for more information).
, or the Send soft key to dial out.
on page 31 and Remote Phone Book
, or the Send soft key to dial out.
or the Tran soft key to complete the transfer when receiving ringback.
or the Tran soft key during a call.
or to dial out.
on page 43 for more information).
Directory