Call Forward; Static Forwarding - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
To disable DND via phone user interface:
Press the DND soft key when the phone is idle.
1.

Call Forward

You can configure your phone to forward incoming calls to another party (static forwarding).
You can also forward calls while your phone is ringing (dynamic forwarding).
Note When the phone forwards a call, a prompt window will pop up by default. If you want to disable
the feature, contact your system administrator for more information.

Static Forwarding

Three types of static forwarding:
Always Forward: Incoming calls are immediately forwarded.

Busy Forward: Incoming calls are immediately forwarded if the phone is busy.

No Answer Forward: Incoming calls are forwarded if not answered after a period of time.

To enable call forward via phone user interface:
Press Menu->Features->Call Forward.
1.
Press
2.
Depending on your selection:
3.
If you select Always Forward:
a)
1)
2)
3)
78
or to select the desired forwarding type, and then press the Enter soft key.
Press or , or the Switch soft key to select Enabled from the Always
Forward field.
Enter the destination number you want to forward all incoming calls to in the
Forward to field.
(Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.