User Interfaces; Phone User Interface; Web User Interface - Yealink SIP-T19 E2 User Manual

LED Status
Slowly flashing yellow (1s)
Off
Note The above introduces the default LED status. The status of the power indicator LED is
configurable via web user interface. For more information, contact your system administrator.

User Interfaces

Two ways to customize configurations of your SIP-T19(P) E2 IP phone:
The user interface on the IP phone.

The user interface in a web browser on your PC.

The hardware components keypad and LCD screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, either the phone user interface and/or the web user interface interchangeably.
However, in some cases, it is only possible to use one or the other interface to operate the
phone and change settings.

Phone User Interface

You can customize your phone by pressing the Menu soft key to access the phone user
interface. The Advanced Settings option is only accessible to the administrator, and the default
administrator password is "admin" (case-sensitive). For more information on customizing your
phone with the available options from the phone user interface, refer to
Phone on page 21.
Fo
Note r a better understanding of the menu structure, please refer to
on page 131.

Web User Interface

In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of your
new phone. To obtain the IP address, press the
Description
The phone receives a voice mail or text message.
The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.
key on the phone when the phone is idle.
Overview
Customizing Your
Appendix B – Menu Structure
5