Yealink SIP-T19 E2 User Manual page 36

User Guide for the SIP-T19(P) E2 IP Phone
The emergency number setting, if desired, must be set before lock activation. For more
Note
information, refer to
To activate the phone lock via phone user interface:
Press Menu->Settings->Basic Settings->Phone Lock.
1.
Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then press the OK soft
2.
key.
Press
3.
Press
4.
field.
(Optional.) Enter the desired interval of automatic phone lock in the Lock Time Out field.
5.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press
If it is set to other values except 0 (e.g., 5), the phone will be locked when the phone is
inactive in idle screen for the designated time (in seconds).
Press the Save soft key to accept the change.
6.
26
Speakerphone key. You are only allowed to dial emergency numbers,
reject incoming calls by pressing the Reject soft key, answer incoming
calls by lifting the handset, pressing the Speakerphone key, the
HEADSET key, the
hanging up the handset, pressing the Speakerphone key or the
EndCall soft key.
Emergency Number
or , or the Switch soft key to select Enabled from the Lock Enable field.
or , or the Switch soft key to select the desired type from the Lock Type
to lock it immediately when the phone is idle.
key, or the Answer soft key, and end the call by
on page 62.