Conference; Local Conference - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Call waiting is configurable via web user interface at the path Features->General Information.
Note If on code or off code is not configured, the call waiting may not take effect. It depends on your
server. Contact your server administrator for more information.

Conference

You can create a conference with other two parties using the phone's local conference. You can
create a conference between an active call and a call on hold by pressing the Conf soft key. The
SIP-T19(P) E2 IP phone also supports network conference.
Network conference is not available on all servers. For more information, contact your system
Note
administrator.

Local Conference

The SIP-T19(P) E2 IP phone supports up to 3 parties (including yourself) in a conference call. This
is the default method of conference called Local Conference.
To set up a local conference call, make sure local conference feature is enabled. For more
Note
information, contact your system administrator.
To set up a local conference call:
Place a call to the first party.
1.
When the first party answers the call, press the NewCall soft key to place a new call.
2.
The active call is placed on hold.
Enter the number of the second party and then press
3.
When the second party answers the call, press the Conf soft key again to join all parties in
4.
the conference.
You can press
86
or to see all parties in the conference.
, , or the Send soft key.