Call Waiting - Yealink SIP-T19 E2 User Manual

- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to
on page
Press
- Press the Dir soft key, and then select History. Select the desired list and then press
or
Directory
Press
- Press the Dir soft key, and then select Remote Phone Book. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
If there are multiple calls, you can select the NewCall and repeat steps mentioned
-
above to complete transfer.
After the party answers the call, press
3.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.

Call Waiting

You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive
another call while there is already an active call on the phone. Otherwise, another incoming call
is automatically rejected by the phone with a busy message when there is an active call on the
phone. You can also enable or disable the phone to play a warning tone when receiving another
call.
To configure call waiting via phone user interface:
Press Menu->Features->Call Waiting.
1.
Press
2.
Press
3.
(Optional.) Enter the call waiting on code or off code respectively in the On Code or Off
4.
Code field.
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is
31 for more information).
, or the Send soft key to dial out.
to select the entry (Directory should be configured in advance. Refer to
on page 31 for more information).
, or the Send soft key to dial out.
on page 31 and Remote Phone Book
, or the Send soft key to dial out.
or , or the Switch soft key to select Enabled from the Call Waiting field.
or , or the Switch soft key to select Enabled from the Play Tone field.
on page 43 for more information).
or the Tran soft key to complete the transfer.
not available on all servers.
Basic Call Features
Directory
85