Adding Contacts; Adding Contacts Manually - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone

Adding Contacts

You can add contacts to the local directory in the following ways:
Manually

From call history

From a remote phone book


Adding Contacts Manually

To add a contact to the local directory manually:
Press the Dir soft key.
1.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory
Menu->Directory->Local Directory to enter the local directory.
Select the desired contact group and then press the Enter soft key.
2.
If the contact you want to add doesn't belong to any group, select All Contacts and then
press the Enter soft key.
Press the Add soft key.
3.
Enter the name and the office, mobile or other numbers in the corresponding fields.
4.
Press
5.
field.
If Auto is selected, this contact will use the ring tone according to the priority: Group ring
tone (refer to
(refer to Ring
Press
6.
field.
36
or , or the Switch soft key to select the desired ring tone from the Ring
Adding Groups) >Account ring tone (refer to
Tones).
or , or the Switch soft key to select the desired group from the Group
refer to Directory on page
(
Ring Tones) >Phone ring tone
31 , press
)