Call Pickup - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
Click Confirm to accept the change.
6.
If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
Note
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in Transfer mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key).
If the call park code is not configured, you need to enter the call park code (e.g., *01).
-
Press
parking lot.
If the call park code is configured, the call will be directly transferred to the shared
-
parking lot.
For some servers, the system will return a specific call park retrieve number (park retrieve
Note
code) from which the call can be retrieved after parking successfully.
To retrieve a parked call in Transfer mode:
Do one of the following:
1.
If the park retrieve code is not configured, dial the park retrieve code (e.g., *11).
-
If the park retrieve code is configured, press the Retrieve soft key on the dialing
-
screen on the IP phone.
The phone will retrieve the parked call from the shared parking lot.

Call Pickup

You can use call pickup to answer someone else's incoming call on your phone. The SIP-T19(P)
E2 IP phone supports directed call pickup and group call pickup. Directed call pickup is used for
picking up a call that is ringing at a target phone number. Group call pickup is used for picking
up a call that is ringing at any phone number in a certain group. The pickup group should be
predefined, contact your system administrator for more information.
92
, or the Park soft key. The call will be transferred to the shared