Call Completion - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone

Call Completion

You can use call completion to notify the caller who failed to reach a desired party when the
party becomes available to receive a call.
To configure call completion via phone user interface:
Press Menu->Features->Call Completion.
1.
Press
2.
field.
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
Call completion is configurable via web user interface at the path Features->General
Information.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the phone:
Press the OK soft key, the phone returns to the idle screen and call completion is activated.
1.
When the called party becomes idle, the following prompt will appear on the LCD screen of the
phone:
Press the OK soft key to redial the number.
1.
Note Call completion is not available on all servers. For more information, contact your system
administrator.
72
or , or the Switch soft key to select Enabled from the Call Completion