Anonymous Call - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
The GPickup soft key appears on the LCD screen.
Press the GPickup soft key on your phone when a phone in the group receives an
2.
incoming call.
The call is answered on your phone.
The directed call pickup code and group call pickup code are predefined on the system server.
Note
Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that configured on a
global basis.

Anonymous Call

You can use anonymous call to block your identify and phone number from appearing to the
called party when you call someone. For example, you want to call to consult some services, but
don't want to be harassed. Anonymous call is configurable on a per-line basis. You can also
configure the phone to send anonymous call on/off code to the server to activate/deactivate
anonymous call on the server side.
Anonymous call is not available on all servers. Contact your system administrator for the
Note
anonymous call on code and off code.
To configure anonymous call via phone user interface:
Press Menu->Features->Anonymous Call.
1.
Press
2.
field.
(Optional.) Press
3.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
96
or , or the Switch soft key to select Enabled from the Local Anonymous
or to select the desired value from the Send Anony Code field.