Blind Transfer - Yealink SIP-T19 E2 User Manual

User Guide for the SIP-T19(P) E2 IP Phone
Select Enabled from the pull-down list of Allow Trans Exist Call.
2.
Click Confirm to accept the change.
3.

Blind Transfer

To perform a blind transfer during a call:
Press
1.
You can do one of the following:
2.
- Enter the number you want to transfer the call to.
Press
If you are using a handset, the transfer can be completed by hanging up the handset.
- Press the Dir soft key, and then select Local Directory. Select the desired group and
search for the contact (Directory should be configured in advance. Refer to
on page
Press
- Press the Dir soft key, and then select History. Select the desired list and then press
or
82
or the Tran soft key during a call.
or the Tran soft key to complete the transfer.
31 for more information).
, or the Send soft key to complete the transfer.
to select the entry (Directory should be configured in advance. Refer to
Directory