Headset Use - Yealink SIP-T19 E2 User Manual

To upload a custom logo via web user interface:
Click on Features->General Information.
1.
Select Custom logo from the pull-down list of Use Logo.
2.
Click Browse to locate the logo file from your local system.
3.
Click Upload to upload the file.
4.
Delete item will appear after you upload a
Note
custom logo.
The logo file format must be *.dob, contact your system administrator for more information.
A custom logo can be uploaded via web user interface only.

Headset Use

If you want to use a headset, physically connect your headset and activate the headset mode for
use. For more information on physically connecting a headset, refer to
page 11.
Note
To use headset, make sure the headset mode is enabled. Contact your system administrator
for more information.
Headset Mode Activation/Deactivation
To activate the headset mode:
Press
1.
The headset icon
Press the Answer soft key to answer an incoming call. The call will be connected to your
on the phone.
appears on the idle screen.
custom logo, you can click
Customizing Your Phone
Delete to delete the
Phone Installation on
49