Using Sca Feature On The Ip Phone - Yealink SIP-T19 E2 User Manual

Using SCA Feature on the IP Phone

This section provides you with detailed information on using the SIP-T19(P) E2 IP phone in a
SCA scenario.
You can do the following using SIP-T19(P) E2 IP phone in a SCA scenario:
Placing calls

Answering calls

Place a call on hold

Retrieving a held call

Placing Calls
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
Enter the desired number using the keypad when the phone is idle.
1.
Press
2.
To place multiple calls on the shared line:
You can have more than one call on the shared line. To place a new call when there is an active
call on phone A, do one of the following on phone A:
Press the Hold soft key. The original call is placed on hold.
1.
Press the NewCall soft key to enter the dialing screen.
2.
Enter the desired number using the keypad.
3.
Press
4.
Phone A will dial the entered number.
Answering Calls
You can have one call or multiple calls on the shared line. Incoming calls will be distributed
evenly among the available shared line.
To answer a call on the shared line:
When an incoming call arrives on the shared line, the phone A and phone B will ring
simultaneously. You can answer the incoming call on either phone A or phone B but not both.
Do one of the following on phone A or phone B:
Press
-
Phone B stops ringing.
Press
-
Phone A stops ringing.
, , or the Send soft key.
, , or the Send soft key.
, or the Answer soft key on phone A.
, or the Answer soft key on phone B.
Advanced Phone Features
113