About This Guide; In This Guide; Summary Of Changes; Changes For Release 81, Guide Version 81.20 - Yealink SIP-T19 E2 User Manual

About This Guide

Thank you for choosing the SIP-T19 E2/SIP-T19P E2 (hereinafter referred to as SIP-T19(P) E2) IP
phone, exquisitely designed to provide business telephony features, such as Call Hold, Call
Transfer, Multicast Paging and Conference over an IP network. The difference between the
SIP-T19 E2 and SIP-T19P E2 IP phones is that only SIP-T19P E2 supports PoE.
This guide provides everything you need to quickly use your new phone. First, verify with your
system administrator that the IP network is ready for phone configuration. Also be sure to read
the Packaging Contents and Regulatory Notices sections in this guide before you set up and use
the SIP-T19(P) E2 IP phone.
Network Directory and Network Call Log features are hidden for IP phones in neutral firmware,
Note
which are designed for the BroadWorks environment. Please contact your system administrator
for more information.

In This Guide

Topics provided in this guide include:
Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5


Summary of Changes

This section describes the changes to this guide for each release and guide version.

Changes for Release 81, Guide Version 81.20

None

Changes for Release 81, Guide Version 81.15

The contents in the following section are removed to
Phones
:
Troubleshooting

Overview
Getting Started
Customizing Your Phone
Basic Call Features
Advanced Phone Features
Frequently Asked Questions on Yealink IP
About This Guide
v