Macos - DETEWE OpenCom 510 User Manual

Communications system for integrated voice and data communication

Table of Contents

Mini-HowTo" you will find instruc-

tions on TCP/IP configuration.

For the OpenCom 510 to configure

the TCP/IP settings of a Linux system

via DHCP, you must also install the

"dhclient" package and activate con-

figuration via DHCP in the Linux net-

work configuration. To access the

OpenCom 510 Configurator, you

should also install Netscape Commu-

nicator 4.5 (or higher).

MacOS

The TCP/IP protocol is already inte-

grated in the new MacOS starting

with version 7.6. For the

OpenCom 510 to configure the TCP/

IP settings of a MacOS system via

DHCP, you must set the configura-

tion method to "DHCP Server" in the

menu "Control Panels TCP/IP".

To access the OpenCom 510 Config-

urator, you should also install Net-

scape Communicator 4.5 (or higher)

or Microsoft Internet Explorer 4.5 (or

higher).

Configuration for Linux and MacOS

Configuration

Table of Contents

Do you have a question about the OpenCom 510 and is the answer not in the manual?