DETEWE OpenCom 510 User Manual page 8

tem to the telecommunications net-
work. An S
eight S ports (switchable to either
0
internal or external connections).
The S interface card provides one
2M
ISDN S interface for connecting
2M
the OpenCom 510 either to a pri-
mary multiplex interface or to a sec-
ond PBX (ISDN point-to-point con-
nection). For an overview of
interface cards, refer to Modules
starting on page 52.
The OpenCom 510 firmware is de-
signed for a maximum of 600 users.
For information on system limita-
tions, refer to Technical Data starting
on page 153.
The following can be connected to
the OpenCom 510:
Euro ISDN terminals
■
DeTeWe system telephones
■
OpenPhone 52 ISDN telephones
■
(to the U
DeTeWe RFP 21 base stations
■
DECT handsets (with RFP 21 con-
■
nected to DECT-capable U
of MS+UPN2-8 interface card)
analogue terminals
■
S interfaces must be operated with
0
Euro ISDN terminals in accordance
with the DSS1 protocol.
6
interface card provides
0
port)
pn
pn
U ports are suitable for connecting
pn
the OpenPhone range of DeTeWe
system telephones. Furthermore,
the DECT-capable U
MS+UPN2-8 interface card can be
used to connect RFP 21 base sta-
tions.
Analogue ports are suitable for con-
necting standard analogue termi-
nals.
If your network provider supports
the CNIP (Calling Name Identifica-
tion Presentation) feature, the
names of callers will be displayed in
addition to the numbers whenever
external calls are received. The
OpenCom 510 supports the display
of the name on system telephones.
However, if you have created an en-
try in the telephone book under the
number of the caller, this entry will
be displayed instead.
The OpenCom 510 can be inte-
grated into an existing local area
network (LAN) and used as an Inter-
net access router and mail client by
all workstations in the LAN.
The OpenCom 510 can be configured
port and programmed by means of a web
browser (web console). This browser
needs to be installed on a PC which
is connected to the system.
The OpenCom 510 can be pre-con-
figured at the service centre and re-
mote-configured for service pur-
poses.
ports of the
pn
Features