Mt+S2M1-1 - DETEWE OpenCom 510 User Manual

MT+S2M1-1

MT+S2M1-1
MT+S2M1-1: Front view
Field of Application
The MT+S2M1-1 interface card pro-
vides one ISDN S
necting the OpenCom 510 either to a
primary rate access or to a second
PBX (ISDN point-to-point connec-
tion).
60
MT+S2M1-1
interface for con-
2M
The MT+S2M1-1 interface card can
be installed in any of the slots (1 to
12) of the OpenCom 510 (see Slots
starting on page 22).
Technical Information
The MT+S2M1-1 interface card
■
can also be installed in a slave
system.
A maximum of four MT+S2M1-1
■
interface cards can be config-
ured in the entire system.
No settings need to be made on
■
the MT+S2M1-1 interface card.
The MT+S2M1-1 interface card
■
runs on software acquired from
the system. After the card has
been installed it will automati-
cally load the required software.
The maximum range is 300 m.
■
The short-circuit-proof feed
■
voltage is 42 V/7 W.
–
Modules