Pbx Ports - DETEWE OpenCom 510 User Manual

PBX Ports

Do you have ISDN terminals
that you wish to operate on
an S interface?
0
Do you want to operate
system telephones or
DECT terminals?
Do you want to operate
analogue terminals
(e.g. a fax machine)?
Do you want to use a
sensor contact on the
OpenCom 510 (e.g. for
a door opener)?
Do you want to run the
OpenCount program?
Flowchart: Configuring the PBX Ports
Configuration Guide
Set the access type (multiterminal
Define the access type
access and/or system access).
Set the external S
Define the external
enter the telephone numbers
S interfaces
0 assigned by your network provider.
S terminals Yes
0
No
U terminals Yes
pn
No
No
Analogue terminals Yes
No
Sensor Yes
No
COM Yes
No
Finished
interfaces and
0
Set the internal S
Define the internal S
0 and enter the internal
interfaces
telephone numbers.
Enter the U
Configure the
and enter the internal
U interfaces
pn
telephone numbers.
Do you want to operate
DECT terminals DECT terminals on the
OpenCom 510?
Yes
Check in the DECT terminals
Configure the DECT
and enter the internal
terminals
telephone numbers.
Set the analogue interfaces
Configure the
and enter the internal
a/b interfaces
telephone numbers.
Enter the internal telephone
Configure the sensor numbers for the time
groups of the sensor.
Configure the COM Select the "connection
interface data" option.
interfaces
0
interfaces
pn
139
PBX Ports