Configuring The Pc Software; Setting Up Tapi - DETEWE OpenCom 510 User Manual

Configuring the PC Software

Further possibilities of use can be
implemented on a workstation PC
with the Windows operating system
by installing drivers and programs.
You can find the installation pro-
grams required for this on the sys-
tem CD that comes with the
OpenCom 510.
Proceed as follows to install extra
software:
1. Log on under Windows NT or
Windows 2000/XP as the admin-
istrator.
2. Insert the system CD.

Setting up TAPI

With a TAPI (Telephony Application
Programming Interface) you can op-
erate a CTI application (computer te-
lephony integration). Here, the CTI
application uses the services of the
OpenCom 510 with the help of the
TAPI driver installed on a Windows
PC.
Requirements
You require an active IP network
connection between the PC and the
telephone system. Refer to the chap-
ter entitled Configuration under Win-
dows starting on page 73 if you have
128
Setting up TAPI
If your PC is suitably configured,
the CD will start automatically.
Otherwise select "Run" from the
Start menu. Click on the
"Browse" button to look for the
program "cd_start.exe" on the
CD. Then confirm this with
"Open" and "OK".
3. Choose the required option from
the start mask and follow the
program instructions.
Further instructions for various op-
tions that are available are given be-
low.
not yet established an IP network
connection. CTI functions can be
used only in conjunction with sys-
tem telephones.
You must therefore have configured
at least one user for a system tele-
phone. In addition, you require a
TAPI 2.1-compatible CTI application,
for example the Phone Dialer in-
cluded in the Windows operating
system.
Configuring the PC Software