Maintenance Schedule; Table 7-1 Maintenance Schedule - SDMO R33C3 User And Maintenance Manual

Chapter 7 MAINTENANCE SCHEDULE

Maintenance schedule

Every 50 service hours
First 50 service hours for
a new or overhauled
engine
Every 250 service hours
Every 500 service hours
Every 1000 service hours
Every 1500 service hours Nozzle tip - Clean
Every 3000 service hours
Every 2 years
As required
7-2

Table 7-1 Maintenance schedule

Interval and Service item
Fuel tank - Drain water
Air cleaner - Check
Engine oil and Oil filter - Replace
Bolts and nuts on the engine - Retighten
Engine oil and Oil filter - Replace
Belt and belt tension - Inspect and Adjust
Radiator fins - Check and Clean
Add grease to link joints, etc.
Fuel filter (in-line type fuel injection pump) - Replace
Fuel system (distributor type fuel injection pump) - Bleed air
Valve clearance - Inspect
Cleaning the fuel tank (Every 500 service hours or Every 1 years)
Checking glow plug
Starter - Inspect
Alternator - Inspect
Bolts and nuts on the engine - Retighten
Fuel injection nozzle - Check and Clean
Turbocharger - Inspect
Coolant - Change
Pre-cleaner - Clean, Inspect and Replace
Air cleaner element - Clean, Check and Replace
Fuel filter - Drain water
Fuel system (in-line type fuel injection pump) - Bleed air
Fuel system (distributor type fuel injection pump) - Bleed air
Specific gravity of battery electrolyte - Check
155/242
Page
8-2
8-14
8-8
*
8-8
8-3
8-13
*
8-6
8-5
*
*
*
8-18
8-18
*
*
*
8-14
8-11
8-15
8-16
8-3
8-4
8-5
8-17