SDMO R33C3 User And Maintenance Manual page 14

Fuels
- Respect current local regulations regarding the equipment and fuel used
(petrol, diesel and gas).
- Top up the engine with fuel when the engine has stopped (except for
equipment with an automatic filling system).
- Smoking, using a flame or producing sparks are forbidden while the fuel
tank is being filled.
- Use protection suitable against fires and explosions.
- Pipes must be replaced as soon as their condition demands it.
Oils
1. Check that the system is no longer pressurised before carrying out any procedures.
2. Avoid contact with hot oil.
3. Wait for the engine to stop and cool down completely before topping up the oil.
4. Before starting the engine, refit the oil filler cap.
5. It is prohibited to cover the generating set with a fine layer of oil for anti-rust protection.
Battery
- Smoking, using a flame or producing sparks are forbidden close to batteries (particularly when the batteries are being
charged).
Supply gas (concerns generating sets running on gas)
- Request the user technical notes and LPG or NG safety data sheets from your gas supplier.
- For any operation on a gas installation, ask a recognised specialist to intervene.
- Gas supply procedures must be carried out in the open air (outside) in accordance with local regulations, in an area well away
from fires, people or animals.
- Check the sealing of the gas supply circuit using soapy water with the circuit pressurised, or using a leak detector.
- It is forbidden to smoke, bring flames near or create sparks when the tank is being filled, and near to the generating set.
12/242