Precautions For Risks Relating To Handling Phases; Precautions For Risks Relating To Noise - SDMO R33C3 User And Maintenance Manual

Battery electrolyte
- Avoid all contact with the skin and eyes.
- Wear suitable protective goggles and clothing and strong alkali-resistant
gloves for handling the electrolyte .
If splashes get into the eyes:
1. Rinse immediately with running water and/or a 10% diluted boric acid solution.
2. Consult a doctor immediately.

1.4.6 Precautions for risks relating to handling phases

1. Select the appropriate handling equipment and apparatus according to the type of equipment being handled. Check that there
is sufficient handling capacity.
2. Check that the handling equipment and apparatus are in good operating condition.
3. Respect the handling instructions described in the present documentation and the pictograms displayed on the equipment to
be handled.
4. Be sure never to stand under the load being handled.
Note: the lifting rings provided on the equipment are designed to handle the generating set alone. If additional equipment is fitted to the
generating set, a study should be conducted in order to define the centre of gravity of the assembly and to check the correct
mechanical performance of the structure and its lifting rings.

1.4.7 Precautions for risks relating to noise

DANGER
- Always use suitable ear defenders when working in close proximity to a generating set which is in operation.
Note: for generating sets used inside, for which the ambient noise levels are dependent upon the installation conditions, it is not
possible to specify these ambient noise levels in the operating instructions. As prolonged exposure to high sound pressure levels can
cause permanent damage to hearing, it is necessary to measure the acoustics after installation in order to determine the sound
pressure level and, if necessary, to implement the appropriate preventive measures.
DANGER
HANDLING PHASES - RISK OF DROPPING
HIGH SOUND LEVEL - RISK OF HEARING LOSS
14/242