Nuts/Bolts/Fasteners; Wheels/Tires; Steering Handlebar - KYMCO G-DINK 300i Service Manual

3. INSPECTION/ADJUSTMENT

NUTS/BOLTS/FASTENERS

Check all important chassis nuts and bolts for
looseness.
Tighten them to their specified torque values
if any looseness is found.

WHEELS/TIRES

Check the tires for cuts, imbedded nails or
other damages.
Check the tire pressure.
＊
• Tire pressure should be checked when
tires are cold.
Tire Pressure
1 Rider
Front 1.75 kg/cm²
Rear 2.0 kg/cm²
Tire Size:
Front 120/70-14
Rear 10/70-13
Check the front axle nut for looseness.
Check the rear axle nut for looseness.
If the axle nuts are loose, tighten them to the
specified torques.
Torque:
Front axle nut
Rear axle nut

STEERING HANDLEBAR

Raise the front wheel off the ground and
check that the steering handlebar rotates
freely.
If the handlebar moves unevenly, binds, or
has vertical movement, adjust the steering
head bearing.
3-11
1 Rider (with
passenger)
1.75 kg/cm²
2.25 kg/cm²
2 kg-m
12 kg-m
G-DINK 300i
Front Axle Nut
Rear Axle Nut