Operating Levels - Siemens Synco 700 Series Basic Documentation

Display examples
Info level
Setting level
Building Technologies
HVAC Products
Start display:
Wednesday 02.12.05
Welcome
« Information
Main menu »
Setting level. Selection of a setting parameter,
e.g. from the Main menu of the user level:
Main menu
Boiler sequence manager...
Boiler 1...
Boiler 2...
Heating circuit
Setting level, pop-up, setting a numerical value:
Entry 1
Start: ––.––.–– ––.––
25.02
End: ––.––.–– ––.––
Reason: Holidays
Cancel entry
Setting level, Help picture "Explanations relating to the selected datapoint". The text
identification number of the menu tree appears in the corner at bottom right (only
access levels "Service level" and "Password"):
Main me> Heating> Heating
[Curvepoint 1] flow temp:
Info level, "Display of key plant data":
Room operating mode
Preselection:
State: Comf
Cause: Time switch
2.2.3

Operating levels

There are 2 operating levels:
• The Info level
• The setting level
• These 2 levels are always active, independent of the access level currently used
When on this level, important plant data can be displayed.
The setting level is structured like a menu. It provides for reading and adjustment of
datapoints.
Using the INFO button, explanations relating to the menus with the individual datapoints
can be displayed. The information is displayed as long as the button is kept depressed.
Boiler sequence controller RMK770
2 Operation
14:52
486
17/232
CE1P3132en
23.04.2009