Garmin G3X Installation Manual page 655

11. Go to the AP page in configuration mode and navigate to the Yaw Damper Servo sub-section to
configure the servo direction.
a) The Yaw Damper Servo Direction should be set to Normal. The servo arm should move
clockwise to cause a nose left rudder movement and servo arm should move
counterclockwise to cause a nose right rudder movement.
b) The Yaw Damper Servo Direction should be set to Reverse. The servo arm should move
clockwise to cause a nose right rudder movement and the servo arm should move
counterclockwise to cause a nose left rudder movement.
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA
NOSE RIGHT
Figure 32-18 Normal Yaw Damper Direction
NOSE LEFT
Figure 32-19 Reversed Yaw Damper Direction
NOSE LEFT
NOSE RIGHT
Page 32-60