Optional Garmin Equipment (Non-Lru); Optional Non-Garmin Equipment; Optional 3Rd Party Sensors/Lrus; Garmin Software And Documents - Garmin G3X Installation Manual

1.5 Optional Garmin Equipment (non-LRU)

1.5.1 Optional GMU 22 Mounting Racks
The Universal Mounting Rack is an optional mounting rack for the GMU 22, refer to the AHRS
Magnetometer Installation Considerations (190-01051-00) document available from www.garmin.com.
Refer to Appendix A for airframe specific GMU 22 mounting racks and related mounting hardware.
1.5.2 Antenna Brackets/Doubler Plates
See Section 20 for detailed information.
1.5.3 Silicon Fusion Tape
Garmin Part Number 249-00114-00 or similar, used to wrap the wiring/cable bundles.

1.6 Optional non-Garmin Equipment

1.6.1 Engine/Airframe Sensors
See Section 21.1 for a list of compatible sensors, and
1.6.2 Mounting Hardware
Some sensors may require a torque screwdriver, copper crush gasket, #10 screws, or #8 ring terminals for
installation.

1.7 Optional 3rd Party Sensors/LRUs

Refer to Section 27, Section
third party equipment.

1.8 Garmin Software and Documents

The below are available for free download from www.garmin.com.
• AHRS Magnetometer Installation Considerations
• Aviation Checklist Editor (ACE) software
• Flightlog Conversion Software
• GDU 37X Cockpit Display Unit Software
• GDU 45X Cockpit Display Unit Software
• GDU 46X Cockpit Display Unit Software
• GSU 73 Data Logger Software
• GSU 73 Field Calibration Tool
• Panel Cut-out DXF File
190-01115-01
Rev. AA
28, Section 29, and Section 30
G3X/G3X Touch Installation Manual - Inventory of Materials
Section 21.3 for a list of available sensor kits.
for wiring/configuration guidance of supported
Page 1-16