Garmin G3X Installation Manual page 653

9. Go to the AP page in configuration mode and navigate to the Roll Servo sub-section to configure
the servo direction.
a) The Servo Direction should be set to Normal. The servo arm should move clockwise to
cause a bank left aileron movement and the servo arm should move counterclockwise to
cause a bank right aileron movement.
b) The Servo Direction should be set to Reverse. The servo arm should move clockwise to
cause a bank right aileron movement and the servo arm should move counterclockwise to
cause a bank left aileron movement.
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA
BANK RIGHT
Figure 32-14 Normal Roll Servo Direction
BANK LEFT
Figure 32-15 Reversed Roll Servo Direction
BANK LEFT
BANK RIGHT
Page 32-58