Garmin G3X Installation Manual page 745

NOTE
The Engine Time item is disabled when a FADEC engine is configured. For FADEC
configurations engine hours from the FADEC data interface will be displayed.
To set Engine Time:
1. In configuration mode, select Engine, then scroll down the list using the inner right knob (or use
touch screen) to highlight Engine Time.
2. Press the Engine Time Bar.
3. Select Menu, Show Advanced Setting (to enable editing of Engine Time field).
4. Edit Current Hours and Select Save.
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA Page 32-150