Antennas; Mounting Requirements - Garmin G3X Installation Manual
Hide thumbs
Also See for G3X:
- Installation manual (849 pages) ,
- Pilot's manual (470 pages) ,
- Maintenance manual (134 pages)
Table of Contents
Advertisement
8.5 Antennas
Refer to
Section 20
for antenna information.
NOTE
GDU 46X units cannot be used with GA 35, GA 36, or GA 37 antennas.
8.6 Mounting Requirements
Refer to
Section 8.7
for outline and installation drawings.
8.6.1
Unit Installation
The GDU 46X is installed by holding the unit flush with the instrument panel and fastening the four 3/32"
hex socket head screws to the panel as shown in
8.6.2
Panel Cutout Template
The GDU 46X Nut Plate (115-01725-01) can be used as a template when marking the panel for cutout
(Figure
7-6) (dimensions on the figure are to verify accuracy of printout only). See
complete cutout dimensions.
190-01115-01
Rev. AA
Figure
8-4.
G3X/G3X Touch Installation Manual - GDU 46X Installation
Figure 8-5
for
Page 8-4
Advertisement
Table of Contents
Troubleshooting
