Garmin G3X Installation Manual page 636

Approach Target AOA Calibration (Optional)
This procedure sets a specific point (1.3 x stall speed is suggested) on the AOA gauge to use as the ideal
target AOA for an approach, glide, short-field landing, etc. If calibrated, the approach target AOA will
display as a green circle on the AOA gauge (Figure 32-13). To be valid, the approach target AOA must be
between the minimum visible (green) and caution alert (yellow chevron) AOA points.
1. Use the Touch Panel or a Move Selector Knob to select the Approach Target AOA Calibration
field, then press the Calibrate button .
2. Follow the onscreen instructions, then press the Start button to begin the calibration.
3. Press the Calibrate button when in compliance with the onscreen instructions.
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA
Approach
Target AOA
Figure 32-13 Approach Target AOA
Page 32-41