Garmin G3X Installation Manual page 536

Approach Target AOA Calibration (Optional)
This procedure sets a specific point (1.3 x stall speed is suggested) on the AOA gauge to use as the ideal
target AOA for an approach, glide, short-field landing, etc. If calibrated, the approach target AOA will
display as a green circle on the AOA gauge (Figure 31-28). To be valid, the approach target AOA must be
between the minimum visible (green) and caution alert (yellow chevron) AOA points.
1. Use the FMS Joystick to select the Calibrated Approach Target AOA calibration field, then press
the Calibrate softkey .
2. Follow the onscreen instructions, then press the Start softkey to begin the calibration.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AA
Approach
Target AOA
Figure 31-28 Approach Target AOA
Page 31-84