Garmin G3X Installation Manual page 728

32.4.25.1 Engine/Airframe Sensors
Each of the sensors must be correctly installed (Section 21) and configured prior to use. The Engine inputs
being monitored are displayed as gauges on the EIS display (Figure 32-36) and also on the MFD Engine
Page.
Figure 32-36 EIS Display (Engine Bar)
The following list of gauges, (if configured) are specifically required by FAR 91.205 and will always be
displayed on the EIS display (engine bar). Other gauges will be displayed as space permits based on a pre-
defined priority and user selections.
RPM Oil Temperature Oil Pressure Fuel Quantity
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA Page 32-133