Jackscrew Configuration Module Installation Into A Jackscrew Backshell - Garmin G3X Installation Manual

22.2 Jackscrew Configuration Module Installation into a Jackscrew Backshell

Table 22-2 & Table 22-3 list parts needed to install a Jackscrew Configuration Module with pins or with
sockets. Parts for these installations are included in the 011-00979-20 and 011-00979-22 kits, which are
included in the G3X w/GSU 73 Installation Kit (K10-00017-00).
Configuration modules are to be installed in the backshells of the P732 connector for the GSU 73 (use
011-00979-20 in Table 22-2), the P3701 connector for GDU 37X designated as PFD1 (use 011-00979-22
in Table 22-3), or the P4501/4601 connector for the GDU 45X/46X designated as PFD1 (use
010-12553-00 in Table 22-4)
Item numbers in Table 22-2, Table 22-3, and Table 22-4 correspond to
Table 22-2 GPN: 011-00979-20 – Kit (w/EEPROM and pins)
Item #
Potted Module (w/EEPROM and
1
Temp.sensor)
3 4 cond. Cable harness
4 Pins Size 22D
10 Pan head screw
Table 22-3 GPN: 011-00979-22 – Kit (w/EEPROM and sockets)
Item #
Potted Module (w/EEPROM and
1
Temp.sensor)
3 4 cond. Cable harness
9 Socket, Size 20, 26-30 AWG
10 Pan head screw
Table 22-4 GPN: 010-12253-00 – Config Module (w/EEPROM, Temp, & Connext)
Item #
Config Module (w/Sockets,
1
Jackscrew, Temp, Connext)
3 4 cond. Cable harness
9 Socket, Size 20, 26-30 AWG
10 Pan head screw
190-01115-01
Rev. AA
Description
Description
Description
G3X/G3X Touch Installation Manual - Connector Installation Instructions
Figure 22-3 and
Qty. Needed GPN or MIL spec
1
1
4
1
Qty. Needed GPN or MIL spec
1
1
4
1
Qty. Needed GPN or MIL spec
1
1
5
1
Figure 22-4.
011-02179-00
325-00122-00
336-00021-00
211-60232-07
011-02179-00
325-00122-00
336-00022-01
211-60232-07
011-03702-00
325-00122-00
336-00022-01
211-60232-07
Page 22-3