Figure 32-40 GSU 73 Engine/Airframe Input Configuration Page
NOTE
For factory-installed systems, the Engine/Airframe Input Configuration section is
replaced with an EIS Configuration page that allows access to calibration functions and
time adjustments, but does not allow changing EIS configuration values. See
Section 32.4.25.3
Airframe Time Configuration
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA
Figure 32-39 EIS Configuration Settings Page
for calibration information,
information.
Engine Time
Configuration, and
Total
Page 32-135