Gi 260 (Aoa Indicator) - Garmin G3X Installation Manual

23.6 GI 260 (AOA Indicator)

23.6.1 Pigtail Connections
Pin Name
AIRCRAFT POWER
POWER GROUND
CAN HI
CAN LO
SHIELD GND
RS-232 RX
RS-232 TX
DC LIGHTING BUS
MONO OUT
AUDIO GROUND
AUDIO SHIELD
23.6.2 Power
AIRCRAFT POWER 1 and POWER GROUND are connected to a 14/28 VDC supply..
AIRCRAFT POWER 1
POWER GROUND
23.6.3 CAN Bus
The CAN Bus conforms to the BOSCH standard for Controller Area Network 2.0-B, and complies with
ISO 11898. Refer to Section 2.3.1.3.2
preferred data interconnect for the GI 260 in a G3X system.
CAN HI
CAN LO
190-01115-01
Rev. AA
Figure 23-17 GI 260 Pigtail Harness
Wire Color
RED
BLACK
BLUE
VIOLET
BLACK HEAT SHRINK
YELLOW
BROWN
GRAY
WHITE
GREEN
BLACK HEAT SHRINK
Pin Name
for details on wiring the CAN bus. Using the CAN Bus is the
Pin Name
G3X/G3X Touch Installation Manual - LRU Pinouts
I/O
IN
--
I/O
I/O
--
IN
OUT
IN
OUT
--
--
Wire Color I/O
RED In
BLACK --
Wire Color I/O
BLUE I/O
VIOLET I/O
Page 23-42