Garmin G3X Installation Manual page 73

GDU 37X PANEL CUTOUT TEMPLATE
IMPORTANT!
Ensure the Page Scaling setting
is set to NONE when printing
this page. Verify dimensions
of printed template are
accurate before cutting panel.
For corner holes, center punch and drill
(#36) / tap (6/32) to create threaded holes
drill out with 25 drill bit and use Garmin
nut-plate P/N 115-01054-00
190-01115-01
Rev. AA
5.57 in
[141.4 mm]
OR
Figure 6-4 GDU 37X Panel Cutout Template
G3X/G3X Touch Installation Manual - GDU 37X Installation
Cut out panel
to inside line
7.33 in
[186.2 mm]
Page 6-5